Do you need modified or custom products ?

Contact us
Spray rinse ball valve

PN10 to PN50, 150Lbs to 300Lbs according to DN

DN15 to DN50 - 1/2" to 2"

  • Connection :
  • Any type of connection (screwed-on, welded or floating flange, threaded, SW, BW, double male or female connection, single male or female connection or other special connections under request)
  • Operation :
  • Stainless steel pneumatic actuator
  • Electric actuator
  • Manual override
  • Manual operator with locking mechanism
  • Extended manual operator with/without cardans
  • Manual operator mounted on ISO base for later adaptation of actuator
  • Limit switches (mechanical, inductive or other)
  • Electro-distributor
  • Junction box
  • Certifications :
  • ATEX certification
  • FDA certificate for body seal and stuffing box packing


Notes :

Some options are not compatible

Special valve can be designed upon request



DN15 to DN50

Pressure class

PN10 to PN50, 150Lbs to 300Lbs according to DN


Welded, screwed-on or floating flange

Material in contact with the fluid

Steel, stainless steel, duplex and super duplex, inconel, incoloy®, hastelloy®, titanium, uranus®, nickel, monel

Stem sealing system

Sealed O’rings stuffing box, with pure or filled PTFE rafters, stuffing box with graphite packing, reinforced stuffing box (O’rings + packing), double safety stuffing box

Body seal material

25% PTFE glass, graphite, reinforced graphite, stainless steel graphite or stainless steel PTFE spiral, helicoflex®, viton, kalrez®, EPDM... 

Seats material

Graphite filled PTFE, glass filled PTFE, stainless steel PTFE, delrin, nylon, polypropylene, peek, TFM1600, TF4215...


Manual, pneumatic (single or double-acting), electrical

Spray rinse ball valve DN40 PN16 in stainless steel 316L, with flushing ball, angle axis, double-acting pneumatic actuator and limit switch box
Spray rinse ball valve DN25 PN16 in stainless steel 316L, tank welded, flushing ball, angle axis, double-acting pneumatic actuator
Spray valve DN50 PN16 in stainless steel 316L, flushing ball, angle axis, cleaning nozzles, with double-acting pneumatic actuator and limit switch box

Operational  principle:

Tank cleaning and spraying



- Tank flushing system to avoid any disturbance (no introduction inside the vessel)

- In closed position, spray holes are inside the valve to ensure that there will be no clogging and a smooth next tank cleaning

- Fully automated system without intervening on the valve

- Whether tank welded or PAD removable

Operating conditions
Operating conditionsCorrosive